69%* of all cable failures occur in joints and terminations, locations which are remote and inaccessible in offshore wind farms. As Synaptec sensors require no data networks or control power, it is now feasible to instrument these remote locations to provide early warning of more cable failure modes than with conventional technology. This dramatically improves availability and safety, while reducing OpEx and outage cost over the life of the array.

Get in touch

Saul Matthews

Saul Matthews

VP Sales

Challenges in offshore cable condition monitoring

Cable failures remain the single largest operational cost in offshore wind. Most power cable faults can be traced back to issues with terminations, where jointing and earthing can be vulnerable to degradation over time. Monitoring sheath currents and temperatures in these terminations and their screen connections provides early and economical failure warnings across every cable in one retrofittable, online monitoring system.

Our solution

Synaptec’s Cable Condition Monitoring (CCM) platform is a simple and powerful solution to enable health monitoring of cable junctions and terminations. Using Synaptec’s Distributed Electrical Sensing (DES) technology, CCM delivers real-time, high-quality data on the cable screen earthing points and ambient temperature. Integrated and customisable threshold alarms and live measurement data are easily integrated with existing SCADA systems, giving wind farm operators awareness and actionable information on the health and status of terminations.

Offshore Cable Condition Monitoring

Synaptec’s unique Distributed Electrical Sensing (DES) technology leverages existing optical fibres to instrument up to 21 mechanical or up to 30 electrical sensors over a 60 km range.

Synaptec sensors do not require data networks, control power, expensive civil works, or time sources at any measurement location, taking as little as 30 minutes per sensor to install.

Current measurements are IEC 60044/IEC 61869 compliant. Temperature measurements are accurate to +/-0.5 °C, allowing the temperature of individual components, such as terminations, to be precisely and discretely monitored. All data – electrical and thermal – are precisely timestamped centrally by the Interrogator module for analysis of fault precursors and trends.

CCM is focused on providing early warning of premature termination failure. CCM is compatible with complementary mid-span optical monitoring technologies such as DTS and DAS and can share the same optical fibre core as those technologies.

Key benefits

  • Permanently and synchronously monitors the relationship phase current, sheath current and temperature with passive sensors
  • Provides earlier warning of more cable failure modes over longer distances compared to conventional monitoring techniques
  • Optimises scheduled maintenance
  • Retrofittable

Download Cable Condition Monitoring flyer

Read our data privacy policy here. By registering above, you are opting in to our newsletter and communications.
This field is for validation purposes and should be left unchanged.

Applications

Select an application below to learn more, or contact us to arrange a free workshop on your particular needs.

Cable condition monitoring in offshore wind

Electrical stress monitoring

Distributed power quality (DPQ) monitoring

Holistic offshore cable monitoring

Related posts

Cable Condition Monitoring in Offshore Wind

Cable Condition Monitoring in Offshore Wind

As Synaptec sensors require no data networks or control power, it is now feasible to instrument these remote locations to provide early warning of more cable failure modes than with conventional technology. This dramatically improves availability and safety, while...

read more
Distributed Electrical Sensing (DES)

Distributed Electrical Sensing (DES)

We reduce outage and operational cost with the world’s only distributed sensor technology for operators of complex power systems. Our passive sensors require no power or data networks, and provide live data more reliably and securely from more locations than...

read more
Passive Strain Transducer (PST)

Passive Strain Transducer (PST)

Synaptec’s Passive Strain Transducer (PST) utilises established, high-performance mechanical sensing techniques which are fully compatible with our Distributed Electrical Sensing (DES) technology, enabling remote circuits to be instrumented passively without data...

read more

Sectors we support

Power Grids

Renewables

Industrial