Electrical stress monitoring
Prevent cable damage with Synaptec’s passive, retrofittable technology.
Conventional monitoring only focusses on the results of cable damage,and not the root cause. Prevent cable damage with Synaptec’s technology, which can identify the underlying electrical causes, reducing operational costs and outages, whilst being easily retrofittable and passive.
Get in touch
Saul Matthews
VP Sales
Challenges in electrical stress monitoring
Remote condition monitoring of a cable’s structural integrity can be achieved by visual inspection, distributed temperature (DTS) and acoustic (DAS) sensing, or partial discharge monitoring, where space and budgets permit. While these techniques can be helpful, they focus on the results of cable damage and not the underlying electrical causes. Monitoring electrical stress factors provides operators with early warning of cable failures, thereby offering more time to intervene and in a planned manner, incurring less cost and impact on operations and income.
Our solution
Our systems are installed centrally in the substation and make use of passive sensors that are easily retrofittable along the array. Using real-time, synchronised electrical measurements, the system identifies electrical stresses caused by transients, harmonics, and oscillations in offshore arrays. These electrical stresses are a principal underlying factor that leads to cable asset degradation and failure, normally detected later in the process of cable degradation by conventional techniques.
Download cable monitoring white paper
Applications
Select an application below to learn more, or contact us to arrange a free workshop on your particular needs.
Cable condition monitoring in offshore wind
Electrical stress monitoring
Distributed power quality (DPQ) monitoring
Holistic offshore cable monitoring
Related posts
Distributed Electrical Sensing (DES)
We reduce outage and operational cost with the world’s only distributed sensor technology for operators of complex power systems. Our passive sensors require no power or data networks, and provide live data more reliably and securely from more locations than...
Passive Strain Transducer (PST)
Synaptec’s Passive Strain Transducer (PST) utilises established, high-performance mechanical sensing techniques which are fully compatible with our Distributed Electrical Sensing (DES) technology, enabling remote circuits to be instrumented passively without data...
Passive Temperature Transducer (PTT)
Synaptec’s range of Passive Temperature Transducers (PTT) utilises established, high-performance temperature measurement techniques which are fully compatible with our Distributed Electrical Sensing (DES) technology, enabling remote circuits to be instrumented...
Sectors we support
Power Grids
Renewables
