Synaptec provides earlier warning of more cable failure modes to avoid outages.

69%* of HV cable failures occur in joints and terminations, which are overlooked by conventional monitoring techniques. Synaptec systems monitor all these inaccessible locations permanently and synchronously to give earlier warning of more failure modes. This is achieved with zero power, zero data, zero maintenance, and zero telecoms sensors monitoring currents, voltages and temperatures at every joint, termination and link box to win operators vital time to intervene and avoid expensive failures. Ask us for more details on how this is done, or download our T&DWorld white paper.

*Source http://www.jicable.org/TOUT_JICABLE/2015_slides/2015-D9-2_slides.pdf

Get in touch

Saul Matthews

Saul Matthews

Head of Commerical Development

Nitin Mahajan

Nitin Mahajan

Business Development – Power Grids (India, GCC & SE Asia)

Challenges in cable condition monitoring

By their nature, underground power cable systems are difficult and costly to access and inspect. Some automation has been made possible by installing permanent DTS (Distributed Temperature Sensing), and in some rare cases permanent PD (Partial Discharge) monitoring technologies, but these techniques do not provide early warning of failures at every joint, and often miss the root causes of failure. Cable screen continuity and earth faults, flooding, and sheath voltage limiter faults can all occur at bonding locations along the circuit, which are not easily inspected manually or instrumented for permanent, online monitoring.

Our solution

Our passive sensor technology is ideally suited to resolving these challenges, with continuous and synchronous measurements streamed from every cable joint and termination by Synchromerger™. By monitoring cable sheath current using Synaptec’s unique and totally passive Distributed Electrical Sensing (DES) technology, it is possible to provide more accurate circuit modelling data, improving the precision of real-time thermal ratings whilst also monitoring for the root causes of asset failure that lead to sheath and screen damage, overheating, water trees, electrical trees, PD, and eventual flashover.

The addition of phase voltage and current sensing enables the monitoring of electrical transients and harmonic content. Transients from switching sources, capacitor banks, and inductive loads, commonly associated with power electronics can stress circuit components and over time introduce damage. Transients can slowly degrade insulation eventually leading to localised overheating and short circuit currents. Synaptec’s cable condition monitoring technology provides utilities with a totally unique and comprehensive set of asset insights, allowing more failure modes to be monitored for progression and providing actionable insights at significantly earlier stages of degradation.

Download cable condition monitoring white paper

Read our data privacy policy here. By registering above, you are opting in to our newsletter and communications.

Applications

Mixed circuit protection

OHL sag, ampacity and Dynamic Line Rating (DLR)

Wide area multi-ended differential protection

Digital substations

Cable condition monitoring

Wide area monitoring

Related posts

Photonic Current and Voltage Transducer (PCVT)

Photonic Current and Voltage Transducer (PCVT)

Synaptec’s PCVT is the first entirely all-optical combined HV current and voltage sensor, bringing together modern passive photonic sensing techniques with well-understood, industry-standard primary converters to deliver unprecedented flexibility and safety. [button...

read more
Photonic Strain Transducer (PST)

Photonic Strain Transducer (PST)

Synaptec’s strain and sag sensor is seamlessly compatible with its electrical current and voltage sensors and the central Interrogator, easily adding valuable mechanical and environmental insights to any Synaptec installation. [button...

read more
Photonic Temperature Transducer (PTT)

Photonic Temperature Transducer (PTT)

Synaptec’s temperature sensors are seamlessly compatible with its electrical current and voltage sensors and the central Interrogator, easily adding valuable insights into the performance and condition of primary equipment and plant. [button...

read more

Sectors we support

Power grids

Renewables

Industrial